KLA SERIES CHECK VALVE - #Needle valve
KLA SERIES CHECK VALVE - #Needle valve
Working Medium Air
Working-pressure Range 0.5~0.95 Kgf/cm2
Ensured Pressure Resistance 15.0 Kgf/cm2
Operating Temperature Range -5~60
Body of Material AluminumAlloy Lyl2
Flow control valve, throttling at both ends
In-line throttle
Connections: push-in connector at both ends
Connections: in-line, Y-shape
Polymer design
Valve function Flow control function
Pneumatic connection 1 G1/8
Adjusting element Knurled screw
Type of mounting Optionally:Front panel mounting With through-hole
Standard nominal flow rate in flow control direction 210 l/min
Operating pressure 0 bar ... 10 bar
Ambient temperature -20 °C ... 60 °C
Housing material Wrought aluminum alloy
Explosion prevention and protection The information in the certificate must be observed!
Nominal width 3 mm
Mounting position Any
Information on operating and pilot media Operation with oil lubrication possible (required for further use)
Temperature of medium -20 °C ... 60 °C
Note on materials RoHS-compliant
Seals material NBR
Material of adjusting screw High-alloy steel
Nut material Wrought aluminum alloy
Sleeve material POM