Ball vibrator K series and GT Series Pneumatic Gear Vibrator
Ball vibrator K series
Operation pneumatic
Product applications multi-product, for bulk materials, for pipework
Type rotary, ball
Other characteristics aluminum, explosion-proof
Rotational speed Max.: 35,000 rpm (219,911.5 rad.min-1)
Min.: 7,300 rpm (45,867.3 rad.min-1)
Force Max.: 4,050 N
Min.: 130 N
DESCRIPTION
Ball vibrators, simple and good. Wide range for many applications.
Properties
• Powerful
• Rated frequency 7,300 – 35,000 rpm
• Centrifugal force 130 – 4,050 N
• Continuously variable
• Can be used up to 100°C
• HT-Version up to 150°C on request
Field of application
• Emptying of bunkers
• Screen filters
• Vibrating tables
• Preventing adhesions in piplines and silos
• Moving of goods
Construction
• Vibration - due to rotating ball running - on hardened, ground steel guides.
• Nylon plates on both sides to support the ball and as protection against dust and water.
• Housing - with - 4 mounting bores.
GT Series Pneumatic Gear Vibrator
Operation pneumatic
Type turbine
Other characteristics aluminum
pneumatic vibrators features:Only needs clean air,Work with low noise,Lubrication free,Small size, easy to install and maintain;
pneumatic turbine vibrators combines high-speed processing & eccentric torque to make a strong vibration force.pneumatic turbine vibrators inner and outer raceways of the bearings are designed so that the bearings can be easily replaced using only a pin-wrench.
The body is made from an extruded stove enamelled aluminium section and the hard coated end plates enables the vibrators to be used in the food and pharmaceutical industries.
No lubrication only clean air is required
Maximum temperature 120°C =250°F
Noise level range 60 ~75 dBA,very quiet
The GT series turbine vibrators conform to current international noise regulations under factory test conditions.
Application:
GT series vibration is produced by the central force of the positive and negative unbalanced moments in the rotor
The rotor is supported on two heavy duty, prelubricated, matched shielded ball bearings. A special long life grease ensures a long working life.
The inner and outer raceways of the bearings are designed so that the bearings can be easily replaced using only a pin-wrench.
The endplates are fitted with right- and left-hand threads and are self-locking.
