انجل فالف - XCP SERIES PLASTIC ACTUATOR BEVEL VALVE - Angle seat valve
XCP SERIES PLASTIC ACTUATOR BEVEL VALVE
Angle seat valve VZXF
The rugged, all-purpose VZXF angle seat valve is ideal for any application requiring open-loop control of media flows—whether gaseous, liquid, or highly viscous.
Sturdy design
Stainless steel and gunmetal process valves with stainless steel, brass, or aluminum actuators
Different actuator sizes and housing materials
Selection of different seat and shaft seals
For liquids, gases, and other easily contaminated media
Easy-to-clean design
Port Size G1/4” ~G3”
KV Value(M3/h) 3.7~135
Actuator 40~100
Medium Temperature -10~+180℃
Flow Direction A(Flow Direction Below The Seat)or B(Flow Direction
Structural design Poppet valve with piston actuator
Actuation type Pneumatic
Sealing principle Soft
Type of mounting Line installation
Cable connection Threaded sleeve 1 NPT as per ANSI/ASME B 1.20.1
Nominal width 13 mm
Valve function 2/2, closed, monostable
Flow direction Non-reversible
Medium pressure 0 MPa ... 4 MPa
Medium pressure 0 bar ... 40 bar
Nominal pressure of fitting PN 40
Exhaust air function Without flow control option
Reset method Mechanical spring
Type of control Externally controlled
Pneumatic connection Internal thread G1/8
Operating pressure 0.6 MPa ... 1 MPa
Operating pressure 6 bar ... 10 bar
Operating pressure 87 psi ... 145 psi
Medium Vapor - Hydraulic fluid based on mineral oil
Inert gas - Mineral oil - Water
Filtered compressed air, 200 µm filter mesh
Neutral liquids
Flow direction Under valve seat, for gaseous and liquid media
Max. viscosity 600 mm²/s
Temperature of medium -40 °C ... 200 °C
Ambient temperature -10 °C ... 60 °C
Flow rate Kv 3.3 m³/h
Valve housing material Cast stainless steel
Material number, fitting housing 1.4408
Spindle seal material PTFE
Seat seal material PTFE
Product weight 1,300 g
Corrosion resistance class (CRC) 2 - Moderate corrosion stress
Drive housing material Brass, nickel-plated
