صمام توجيهي

صمام خانق مع عدم رجوع - KLA SERIES CHECK VALVE - #Needle valve

KLA SERIES CHECK VALVE - #Needle valve


 Working Medium            Air
 Working-pressure Range        0.5~0.95 Kgf/cm2
 Ensured Pressure Resistance        15.0 Kgf/cm2
 Operating Temperature Range        -5~60
 Body of Material            AluminumAlloy Lyl2

Flow control valve, throttling at both ends
In-line throttle
Connections: push-in connector at both ends
Connections: in-line, Y-shape
Polymer design

Valve function             Flow control function
Pneumatic connection 1        G1/8
Adjusting element            Knurled screw
Type of mounting            Optionally:Front panel mounting With through-hole
Standard nominal flow rate in flow control direction        210 l/min
Operating pressure             0 bar ... 10 bar
Ambient temperature        -20 °C ... 60 °C
Housing material            Wrought aluminum alloy
Explosion prevention and protection    The information in the certificate must be observed!
Nominal width            3 mm
Mounting position            Any
Information on operating and pilot media    Operation with oil lubrication possible (required for further use)
Temperature of medium        -20 °C ... 60 °C
Note on materials            RoHS-compliant
Seals material            NBR
Material of adjusting screw        High-alloy steel
Nut material            Wrought aluminum alloy
Sleeve material            POM